Dit product is niet meer op voorraad
Waarschuwing: Laatste item(s) op voorraad!
Electric Motor Bearing Grease
Super-premium Mobil Polyrex™ EM Series greases are specially formulated for electric-motor bearings. The advanced thickener formulation and proprietary manufacturing techniques provide improved bearing performance and protection for long electric motor life.
Mobil Polyrex EM and Mobil Polyrex EM 103 offer the following features and benefits:
|Features||Advantages and Potential Benefits|
|Outstanding grease life||Outstanding long-life, high-temperature lubrication of ball and roller bearings, particularly in sealed-for-life applications|
|Advanced polyurea thickener||Increased durability versus conventional polyurea greases when subjected to mechanical shear forces|
|Excellent corrosion resistance||Mobil Polyrex EM and Mobil Polyrex EM 103 provide protection against rust and corrosion.Mobil Polyrex EM provides additional protection under mild salt-water wash conditions versus Polyrex EM 103|
|Low-noise properties||Mobil Polyrex EM is suitable for lubrication of ball bearings in many noise-sensitive applications|
Mobil Polyrex EM greases are recommended by many major bearing and electric motor manufacturers for long-life lubrication of electric motor ball and roller bearings.
Mobil Polyrex EM 103 is more specifically recommended for applications such as vertically mounted bearings, or very large motors where a stiffer grease consistency may be required by the OEM.
Mobil Polyrex EM greases have been shown to be compatible with a number of ExxonMobil lithium complex greases, as well as competitive electric motor mineral polyurea products, as determined by the methodology of ASTM D6185. For specific questions about grease compatibility, contact your Mobil representative.
Key applications include:
|Mobil Polyrex EMmeets or exceeds the requirements of:||Mobil Polyrex EM||Mobil Polyrex EM 103|
|DIN 51825: (2004-06)||K2P-20|
|Mobil Polyrex EM||Mobil Polyrex EM 103|
|Base Oil Viscosity, ASTM D 445|
|cSt @ 40°C||115||115|
|cSt @ 100°C||12.2||12.2|
|Viscosity Index, ASTM D 2270||95||95|
|Penetration, ASTM D217 worked, 60x, mm/10||285||250|
|Penetration Change after 100.000 strokes, ASTM D217, mm/10||40||40|
|Dropping Point, ASTM D 2265, °C (°F)||260||270|
|Oil separation test, ASTM D 1742, %||0.5||0.1|
|High Temperature Grease Life, ASTM D 3336, Hours @ 177°C||750+||750+|
|4-Ball Wear Scar, ASTM D 2266, @ 40kg, 1200 rpm, 75°C, 1 hr, mm||0.41||0.6|
|Low Temperature Torque, ASTM D 1478, g-cm @ -29°C|
|EMCOR Corrosion Performance, 10% Synthetic Sea Water ASTM D 6138 (Prepared As Per ASTM D 665B)||0,1 (No Rust)|
|Rust Protection, ASTM D 1743, Distilled Water||Pass||Pass|
|Copper Corrosion Resistance, ASTM D 4048||1A||1A|
|Water Washout, ASTM D 1264, %||1.9||0.8|