Mobil Delvac 1 5W-40 20L View larger

Mobil Delvac 1 5W-40 20L

New product

More info

Mobil Delvac 1 5W-40 

High Performance Heavy Duty Diesel Engine Oil

Product Description

Mobil Delvac 1 5W-40 is a fully synthetic high performance heavy duty diesel engine oil that helps towards long engine life while providing long drain capability for modern diesel engines operating in severe applications. Mobil Delvac 1 5W-40 delivers excellent performance in modern low emission engines, including refrigerated units, as well as older, well-maintained engines. Mobil Delvac 1 5W-40 is recommended for use in a wide range of heavy-duty applications and operating environments found in the on-road transport and off-road mining, construction, and agricultural industries. Mobil Delvac 1 also meets the requirements of the API SL specification for gasoline engines used in mixed fleets.

The excellent performance of Mobil Delvac 1 5W-40 is the result of extensive cooperative development work with major equipment builders and application of advanced lubrication technology. As a result, this product meets or exceeds the requirements of some of the latest API, ACEA, JASO, and Global industry specifications for diesel engine oils, as well as the requirements of many major American, European, and Japanese engine manufacturers.

 

Features and Benefits

Many modern, low emission diesel engines generate more soot and operate at higher temperatures than older engines. This significantly increases the need for high performance lubricants. Current tighter engine designs reduce oil consumption, resulting in less fresh oil makeup to replenish depleted additives. Top piston rings are located higher, bringing the oil film closer to the combustion chamber and exposing the lubricant to severe thermal stresses. Mobil Delvac 1 5W-40 maintains outstanding performance at high temperatures. It is also fully compatible with conventional oils. The key benefits include:

 

Features Advantages and Potential Benefits
Meets or exceeds demanding specifications of major OEMs One engine oil for mixed fleet operations
Outstanding thermal and oxidation stability Control of low temperature sludge build-up and high temperature deposits
Low volatility, excellent wear and bore polish control Good oil consumption control
Expertly formulated low viscosity formulation Fuel economy potential(1)
Exceptional low temperature pumpability Easier engine start-up and reduced wear
Good resistance to corrosion Helps towards long life of critical wear surfaces
Long drain capability Help towards operational efficiency andoverall cost control
Component compatibility Long gasket and seal life, extended service intervals

 

1 Relative to conventional 15W-40 engine oil. Actual fuel economy improvement is dependent on vehicle/equipment type, outside temperature, driving conditions and your current fluid viscosity

 

Applications

Mobil Delvac 1 5W-40 is recommended for use in super high performance diesel applications, including modern low emission engine designs with Exhaust Gas Recirculation (EGR). These applications include the following:

  • On-highway engines operating in both high speed/high load and stop-and-go conditions
  • Off-highway engines operating in severe low speed/heavy load conditions
  • Virtually all diesel powered equipment from American, European, and Japanese equipment builders
  • Refrigeration units

 

Specifications and Approvals

 

Mobil Delvac 1meets or exceeds the requirements of: 5W-40
API CI-4 PLUS/CI-4/CH-4/SL/SJ X
ACEA E7/E4 X
Cummins CES 20078/20077/20076 X
Ford WSS-M2C171-D X
Renault Trucks RXD X
Global DHD-1 X
JASO DH-1 X

 

 

 

Mobil Delvac 1 5W-40 has the following builder approvals: 5W-40
Detroit Fluids Specification 93K214 X
MB-Approval 235.28 X
MB-Approval 228.5 X
Voith Retarder Oil Class B X
Volvo VDS-2 X

 

 

 

Mobil Delvac 1 5W-40 is recommended by ExxonMobil for use in applications requiring: 5W-40
API CG-4/CF-4/CF X
Caterpillar ECF-1-a X
Cummins CES 20072/20071/20075 X

 

 

Typical Properties

 

Mobil Delvac 1 5W-40
SAE Grade 5W-40
Viscosity, ASTM D 445
cSt @ 40ºC 102
cSt @ 100ºC 14.8
Viscosity Index, ASTM D 2270 151
Sulfated Ash, wt%, ASTM D 874 1.35
Total Base #, mg KOH/g, ASTM D 2896 12
Pour Point, ºC, ASTM D 97 -45
Flash Point, ºC, ASTM D 92 226
Density @ 15ºC kg/l, ASTM D 4052 0.854